Exp-2 To study the relationship between force of limiting friction and normal reaction and to find the co- efficient of friction between a block and a horizontal surface.

Exp-3 To find the downward force, along an inclined plane, acting on a roller due to gravitational pull of the earth and study its relationship with the angle of inclination φ by plotting graph between force and sin(φ).

Exp-4 To study the variation in volume with pressure for a sample of air at constant temperature by plotting graphs between P and V, and between P and I/V.

Exp-5 To find the speed of sound in air at room temperature using a resonance tube by two resonance Positions.

Exp-6 To determine resistance per cm of a given wire by plotting a graph of potential difference versus current.

Exp-7 To draw the I-V characteristic curve of a p-n junction in forward bias and reverse bias.

Exp-8 To draw the characteristic curve of a zener diode and to determine its reverse breaks down voltage.

Exp-9 Characteristics of PN diode.

Exp-10 To study the Simple Harmonic Motion.

Exp-11 Charging and Discharging of the capacitor.

Exp-12 To study the characteristics of a common - emitter NPN or PNP transistor and to find out the values of current and voltage gains.

Exp-13 To verify laws of reflection of sound.

Exp-14 To study the dependence of potential difference (V) across a resistor on the current (I) passing through it and determine its resistance. Also plot a graph between V and I.

Exp-15 To determine the equivalent resistance of two resistors when connected in series.

Exp-16 To determine the equivalent resistance of two resistors when connected in parallel.

**Scope of Supply:**

Item Name |
Qty. |

Einstein tablet+ | 1 |

Accelerometer | 1 |

Force Sensor | 1 |

Photo-gates | 2 |

Current Probe sensor | 2 |

Voltage Probe sensor | 1 |

Magnetic Field Sensor | 1 |

Temperature Probe | 1 |

Light Sensor | 1 |

Gas Pressure sensor | 1 |

Friction block & Roller | 1 |

Weight (50 x 10gm) | 1 |

Metal Track | 1 |

Inclined plane | 1 |

Base & Rod | 2 |

Boss head | 2 |

Calorimeter | 1 |

Dynamic trolley | 2 |

Pendulum ball | 1 |

Item Name |
Qty. |

Motion detector | 1 |

Pendulum support | 1 |

Spring | 1 |

Weight (50 x 10gm) | 1 |

Acrylic tube | 1 |

Tube holder | 1 |

Plug in board | 1 |

Resistance board | 1 |

Connecting lead | 10 |

Transistor | 2 |

Zener diode | 1 |

Diode | 1 |

Led | 1 |

Switch | 1 |

Capacitor module | 1 |

Resistance modules | 3 |

Power supply 0-16V | 2 |

Logger Pro3 | 1 |

**ADDITIONAL EXPERIMENTS:**

Exp-1 To demonstrate inter-conversion of potential and kinetic energy.

Exp-2 To demonstrate conservation of linear momentum.

Exp-3 To demonstrate the phenomenon of beats, due to superposition, of waves produced by two sources of sound of slightly different frequencies.

Exp-4 To demonstrate the production of induced emf in a coil due to the movement of (i) a magnet towards and away from it.(ii) a similar coil carrying current towards and away from it.

Exp-5 To demonstrate the effect of intensity of light.

Exp-6 Determining g on an Incline.

Exp-7 The Magnetic Field in a Coil.

Exp-8 Newton's Second Law and Third Law.

Exp-9 Energy in Simple Harmonic Motion.

Exp-10 Newton's Law of Cooling.

***Note:** Computer will not be provided with SA029 kit.